What exactly do you
know about chillers? If you have one or plan on buying one then you should
learn a little information to help understand them better. If you currently own
a chiller then it is important to understand what type you have and how to maintain
it. If you plan on purchasing one then it is important to understand them so
that you purchase the proper one and you also know what the maintenance is on
the unit.
In
this article we are going to go over what type of chillers there is and what
the required maintenance is on the unit. First it is important to understand
what different types there are. Well there are two more common types of
different types of chillers. These are the two types that we will be focusing
on. The first is the absorption chiller. This type can be put into two
different groups. The two different groups are single or double effect.
The
single effect works with just one generator. The double effect has two
generators. The two generators make it possible to have either a low temp or a
high temperature depending what you need the unit for depends on what type will
best suit you and your businesses needs. Each effects work in different ways.
Whether you purchase a single or a double effect they both operate off of
thermal energy to cool the water. A very common thing that happens to these
types of units is crystallization because the water gets cooled at too high of
a temperature. So maintaining the chiller frequently is recommended.
The
other type of chiller that you can purchase is the refrigerant. This type also
has a high temp and a low temp. It uses the Carnot cycle to run. It runs either
of two ways it can be air cooled or water cooled. There are something that you
need to take into consideration. It is extremely important to how the unit is
designed. Most of these types are custom. So you have to decide the design and
the performance you need it to perform at and how much water you need it to
cool. All of these factors will determine on how your unit performs.
How
to maintain your unit. Well you should hire a professional to come and do the
proper maintenance on the unit. You need to make sure that the flow of the
water is being pumped at the right speed. It is recommended that it should go
at 3 feet per square inch.
Coolaire Consolidated’s
refrigerated display freezers and chillers are made for tropical environments
such as that of the Philippines, with all-stainless steel cases and glass doors
and windows. With ranges from half-door, full-door, to countertop variants,
they are made for a wide array of requirements such as chiller, freezer,
top-freezer/bottom-chiller, blast freezer and blast chiller. Waste no more time
and visit http://coolaireconsolidated.com/
0 comments:
Post a Comment